Search found 202 matches
- June 8th, 2022, 11:21 am
- Forum: General Discussion
- Topic: SC20 Torqeedo ?
- Replies: 10
- Views: 35962
- June 7th, 2022, 8:53 am
- Forum: General Discussion
- Topic: SC20 Torqeedo ?
- Replies: 10
- Views: 35962
Re: SC20 Torqeedo ?
I had a torqueedo 1003 long shaft on my 15. It worked fine. It might struggle to push you dead to windward in a stiff breeze.
- October 14th, 2021, 10:14 am
- Forum: General Discussion
- Topic: 19 wire traveler conversion
- Replies: 4
- Views: 27645
Re: 19 wire traveler conversion
My 15 had a 22mm Harken track installed across the rear crossbeam. The tramp was held with a bolt rope track across the rear beam. The track was held down with flat head machine screws that were tapped into the crossbar. There was no bedding compound between the track and crossbar. There was no anti...
- September 6th, 2021, 10:50 am
- Forum: General Discussion
- Topic: Proper reeving of rudder lines?
- Replies: 18
- Views: 75226
Re: Proper reeving of rudder lines?
Yes, once I tried the reverse rigging with the two line pull I saw that It could be done.
- August 6th, 2021, 9:58 am
- Forum: General Discussion
- Topic: SuperCat 19 Resurrection
- Replies: 24
- Views: 59854
Re: SuperCat 19 Resurrection
That's some major surgery!
"The stuff that was rolling around inside the hull was tree bark from a pine"
Maybe a pine tree fell on it. Or it hit a pine tree.
"The stuff that was rolling around inside the hull was tree bark from a pine"
Maybe a pine tree fell on it. Or it hit a pine tree.
- August 5th, 2021, 1:37 pm
- Forum: General Discussion
- Topic: Daggerboard Screw
- Replies: 5
- Views: 30783
Re: Daggerboard Screw
I don't know but Daggerboard Screw sounds like a Frank Zappa tune.
- July 27th, 2021, 11:07 am
- Forum: General Discussion
- Topic: SuperCat 19 Resurrection
- Replies: 24
- Views: 59854
Re: SuperCat 19 Resurrection
The afore mentioned unpleasant surprises.
- July 22nd, 2021, 7:59 pm
- Forum: General Discussion
- Topic: SuperCat 19 Resurrection
- Replies: 24
- Views: 59854
Re: SuperCat 19 Resurrection
I learned to water ski on Lake Martin. Your cat has dagger boards, she's a 19. Those are hulls, not pontoons. Keep us posted on the restoration. Could you post a close up of the main sail feeder on the mast. I have the same style mast and feeding in the sail is a pain. Thanks GH
- July 22nd, 2021, 10:34 am
- Forum: General Discussion
- Topic: SuperCat 19 Resurrection
- Replies: 24
- Views: 59854
Re: SuperCat 19 Resurrection
Do you know what formula of paint is on the hulls? That cracked mast step looks like the result of mast rotation or sway not being controlled during raising or lowering. Good luck with the re-fit. Where will you sail her?
- July 21st, 2021, 11:08 am
- Forum: General Discussion
- Topic: SuperCat 19 Resurrection
- Replies: 24
- Views: 59854
Re: SuperCat 19 Resurrection
Is that the one from SE Virginia? It was on the Norfolk CL and I linked the ad to the For Sale page here.
- July 20th, 2021, 9:01 am
- Forum: General Discussion
- Topic: Proper reeving of rudder lines?
- Replies: 18
- Views: 75226
Re: Proper reeving of rudder lines?
Pull the blue line, the rudder goes in. Pull the red line the rudder comes out.
- July 19th, 2021, 3:20 pm
- Forum: General Discussion
- Topic: Proper reeving of rudder lines?
- Replies: 18
- Views: 75226
Re: Proper reeving of rudder lines?
With this rig it's one line pull down, one line pull up.
- July 19th, 2021, 2:39 pm
- Forum: General Discussion
- Topic: Proper reeving of rudder lines?
- Replies: 18
- Views: 75226
- July 17th, 2021, 7:38 am
- Forum: Technical Forum
- Topic: Downhaul Rigging
- Replies: 6
- Views: 31881
Re: Downhaul Rigging
When I got the new square top main, Tom sent me the drawings I needed to rig the regulation downhaul. Mine is a little less involved than yours. I posted a picture here on the forum.
viewtopic.php?f=3&t=1012
viewtopic.php?f=3&t=1012
- July 17th, 2021, 7:29 am
- Forum: General Discussion
- Topic: New SC17 owner
- Replies: 4
- Views: 26893
Re: New SC17 owner
My roller furler has a short pigtail that goes between the the swivel and the mast hound. I rig a 6:1 main sheet. No reason not to re-use the blocks if they give you the proper advantage.