Page 1 of 1
Jib Block Tracks??
Posted: October 21st, 2007, 12:12 am
by Kevin Keller
I have a SC20 and am thinking about putting some kind of track system on each hull so I can move the jib blocks fore and aft.
Has anyone else done something like this?
Posted: October 21st, 2007, 1:28 pm
by Matt Haberman
Kevin,
I don't recall ever seeing any 20's with tracks for the jib, but I know that a lot of guys put extra eyestraps on the hulls so they could move the jib leads forward or aft to get the proper sheeting angle for their jib.
Posted: October 21st, 2007, 10:16 pm
by Kevin Keller
Thanks Matt. I have thought about that also. Would you recommend doing that instead of putting a track system down?
What kind of range would you make these points?
Is this an adjustment you make once and leave it there for sailing different points?
I am still doing fiberglass work on my hulls and it looks like it would be easy to add a track.
Kevin
Posted: October 22nd, 2007, 5:32 pm
by Matt Haberman
Typically I think this is an adjustment you would make for a certain sail and then leave it alone. To me a track & car always looks cluttered, where as the eyestraps tend to be low-profile and clean looking. In the past I have seen them with eyestraps at each tramp track hole location over an 18-24" range.