Search found 214 matches
- February 24th, 2023, 12:26 pm
- Forum: General Discussion
- Topic: Racing SC15 weight
- Replies: 2
- Views: 7182
Re: Racing SC15 weight
I have been racing my 15 for years--hurting a ton of Hobie 16 feelings. I weigh 175-180 and I prefer to sail solo on that boat. I can really feel the difference with crew. However, I am used to sailing it solo--and I REALLY know the boat, so that is probably why I can feel the difference. I don't th...
- October 16th, 2018, 8:59 am
- Forum: Technical Forum
- Topic: Outboard Motor Mount
- Replies: 29
- Views: 59393
Re: Outboard Motor Mount
I think the boats are so wet and there really isn't a lot of room for batteries or a tank, you would have to get very creative. A friend gave me an old 2 hp motor with a tank on the top, but it is a little too big for my liking. I was going to install port holes on the deck of my 19, anyway, so I th...
- October 12th, 2018, 2:32 pm
- Forum: Technical Forum
- Topic: Outboard Motor Mount
- Replies: 29
- Views: 59393
Re: Outboard Motor Mount
I have a cheetah motor mount I can part with. I got it on a Supercat 19 and thought I would use the platform as a committee boat, but... that aint gonna happen..
- June 28th, 2018, 12:17 pm
- Forum: Technical Forum
- Topic: Sc15 hull repair
- Replies: 4
- Views: 6850
Re: Sc15 hull repair
I tried to buy that boat, but missed it-- I have a replacement hull down in Norfolk, VA! I think it even has the same stripes on it.
I would love to get it out of the yard..
I would love to get it out of the yard..
- March 27th, 2018, 10:26 am
- Forum: Technical Forum
- Topic: One more Squaretop vs pinhead question
- Replies: 5
- Views: 8234
Re: One more Squaretop vs pinhead question
Again, Dang, Bill!!?? OK, so I get that glider wings are good, but we can't have THAT much of a high aspect ratio on our boats. My observations were from A cat and F18HT sailing. The A cats are very light and have high aspect ratio mains (like the Spitfire). It was my understanding that they didn't ...
- March 27th, 2018, 10:12 am
- Forum: Technical Forum
- Topic: Interesting repair
- Replies: 6
- Views: 10104
Re: Interesting repair
dang, Bill!?
That was a small hole near the stern in a low stress area. I understand that fiberglass is all about the continuous fibers and all that, but in a simple hole repair like this... You don't have to go after it with a hand grenade when a pea shooter will do.
That was a small hole near the stern in a low stress area. I understand that fiberglass is all about the continuous fibers and all that, but in a simple hole repair like this... You don't have to go after it with a hand grenade when a pea shooter will do.
- March 19th, 2018, 11:11 am
- Forum: Technical Forum
- Topic: One more Squaretop vs pinhead question
- Replies: 5
- Views: 8234
One more Squaretop vs pinhead question
Bill, I read the articles on the square tops--very informative! My question is about the sail shape difference on the leech. My pinhead has a huge roach in the middle of the sail and it tapers a little to the foot. That, to me, is like a bomber wing, which gives a lot of power in the middle of the s...
- September 22nd, 2017, 9:00 am
- Forum: General Discussion
- Topic: Driving an SC15!
- Replies: 0
- Views: 23885
Driving an SC15!
Apparently, Hobie sailors don't understand why I sail my 15 like I do--I trap out in front of the front beam and bury the leeward bow. They say it looks funny, but they usually see it from behind! In this race, I was fighting a nasty current and I had to rely on the bow for 'lift'. Now, I know in th...
- August 24th, 2017, 10:51 am
- Forum: General Discussion
- Topic: SC 19 for sale
- Replies: 7
- Views: 10733
Re: SC 19 for sale
I have a 19 that I am refurbishing and selling. I'm in Norfolk, VA.
Dan
danberger@mindspring.com
757-589-6920
Dan
danberger@mindspring.com
757-589-6920
- April 26th, 2017, 11:45 am
- Forum: Technical Forum
- Topic: Need repair advice
- Replies: 10
- Views: 13183
Re: Need repair advice
I was thinking about that through the crack thing, too. I'm just not sure how I can get the resin to coat the inside of the hull, much less cleaning the inside of the hull. So, what I'm thinking--I'm pretty sure there is a crack in the inner layer. I can do Matt's trick of making a patch and getting...
- April 20th, 2017, 10:46 am
- Forum: Technical Forum
- Topic: Need repair advice
- Replies: 10
- Views: 13183
Re: Need repair advice
I'm not sure, I didn't dig out any of the foam. I have a feeling, though, that it is probably delaminated on the back side. I'm thinking that I could make a much larger hole, dig out all the foam, then lay a few sheets of glass onto the back side glass and then fill the area with filling and then la...
- April 19th, 2017, 12:46 pm
- Forum: Technical Forum
- Topic: Need repair advice
- Replies: 10
- Views: 13183
Re: Need repair advice
Close-up
- April 19th, 2017, 12:46 pm
- Forum: Technical Forum
- Topic: Need repair advice
- Replies: 10
- Views: 13183
Re: Need repair advice
ground out area and close-up:
- April 19th, 2017, 12:44 pm
- Forum: Technical Forum
- Topic: Need repair advice
- Replies: 10
- Views: 13183
Re: Need repair advice
Closeup of old repair:
- April 19th, 2017, 12:43 pm
- Forum: Technical Forum
- Topic: Need repair advice
- Replies: 10
- Views: 13183
Need repair advice
One of our local SC sailors picked up a 1981 Boston Whaler built 15 a few years ago and the previous owner had made some not-so-pretty repairs. One of the sterns looked like it was ripped off and patched back on and never finished. It looks like a good repair, but it needed a LOT of work. I have spe...