Aquarius Sail Owners

Matt, I would have to asume that it gets well into the 100's in that box, after all, this is way south Forida. It is unlikely that I put the boards away wet however we just concluded rainy season.... There could have been water that seeped into the box.(?) Thank you, Eric PS, the new tramps are beau...

Today I took my foils out of the trailer box and the paint had bubbled. What the heck caused that? One foil is original and one is less than a year old.

Now, where do I go from here?

Tom, Thanx for the reply, the forward tramp arrived today. I am really pleased with the improvements that have been made in both the main and forward tramps. I am going to try to use the outer webbing from the old tramps to make some covers for the new ones. I am going to remove the old net and repl...

The material is the same on the ARC21. i would consider it pretty dry plus very fast draining and possibly less windage in the pre flip position! (?)

Tom,
would it be wise to take the tension off the tramp between uses to extend the life of the tramp?
Eric 2101

My boat needs a makeover.

When applying new paint, can I use the old paint as primer if it is prepared in the correct manner? Or, must it be removed and start from scratch?

Can anyone provide pics of the dolphin striker set uo an the ARC 22?

Are the 12' tubes 6061 T6? And can anyone provide me with the wall thickness needed to go to 12'.

I can find loads of 6063 but 6061 is a little more difficult. What is used by the factory for the ARC boats?

Thank you for the prompt reply, you are right, a few bucks is not worth the aggravation.
What is the color name or code for the white that you use?

What is the spec paint for ARC products?

I ran across this product this morning, looks interesting.

http://www.topsecretcoatings.com/Marine-Coatings.asp

So, what is the OD of the bottom batten?

Habermans,

Please, provide me with a quote for the riggin, Tramp, beams, straps and dolphin striker and other associated bits.I need to know if this is feasable to consider.

A reply or PM will be greatly appreciated.

Thank you in advance,

Eric

Beautiful boat....

I just bent my tiller cross bar on my ARC 21. What is the overall length of this part? I have some anodized alum tube to make the replacement but I only want to cut once....

I am bringing this up again since I never got a response the first time.

Has the above procedure been used before on smaller cats? Bill?

Peter, I wish i could get up there, I have some family in the neighborhood that you may have heard of, it is just too far to drive from Miami. My wifes sister is Susan Dreyfus ( the Red Vested Governor), daughter in law of the former governer. We get to Waukeshau once in a while, usually while it is...