Search found 356 matches
- April 11th, 2008, 8:17 pm
- Forum: Technical Forum
- Topic: Refurbishing SC20
- Replies: 37
- Views: 41182
George, Thanks for the compliment. You are right, my eye is much more critical than others, having done the work, and I see any imperfections. The paint used was PPG's Concept, single stage. One of the beauties of working with this paint is that it is easy to go back and touch up areas. I ended up f...
- April 8th, 2008, 5:30 am
- Forum: Technical Forum
- Topic: Refurbishing SC20
- Replies: 37
- Views: 41182
- April 8th, 2008, 5:16 am
- Forum: Technical Forum
- Topic: Refurbishing SC20
- Replies: 37
- Views: 41182
- April 8th, 2008, 5:05 am
- Forum: Technical Forum
- Topic: Refurbishing SC20
- Replies: 37
- Views: 41182
More pictures. I was completely finished and ready to prime the hulls. I made some more stands so I could raise them up for painting. As I was mounting one of the hulls it rolled over and fell about 3 feet to the ground. The transom hit the cement and the rest of the boat hit the wood floor and a to...
- April 8th, 2008, 4:45 am
- Forum: Technical Forum
- Topic: SC20 mast weight?
- Replies: 4
- Views: 5938
- March 30th, 2008, 6:17 pm
- Forum: Technical Forum
- Topic: Bulging Dagger Boards
- Replies: 3
- Views: 4171
- March 30th, 2008, 6:07 pm
- Forum: Technical Forum
- Topic: Bulging Dagger Boards
- Replies: 3
- Views: 4171
- March 30th, 2008, 5:02 pm
- Forum: Technical Forum
- Topic: Bulging Dagger Boards
- Replies: 3
- Views: 4171
Bulging Dagger Boards
I have 4 dagger boards for my older SC-20. Each one of them has bulged out in certain areas along its length. They have done so to the point that they will not even fit all the way down a cleaned up dagger well (without carpet). If I take a straight edge to the boards you can see a definite bulge on...
- March 30th, 2008, 3:23 am
- Forum: Technical Forum
- Topic: What type of paint
- Replies: 8
- Views: 8776
- March 29th, 2008, 3:45 am
- Forum: General Discussion
- Topic: How Fast Will a SC-20 Go?
- Replies: 2
- Views: 3914
- March 27th, 2008, 10:23 pm
- Forum: General Discussion
- Topic: How Fast Will a SC-20 Go?
- Replies: 2
- Views: 3914
How Fast Will a SC-20 Go?
How fast do you think a SC-20 with just a sail and jib will go?
Decent sails, both Tall Rig and the normal mast.
Decent sails, both Tall Rig and the normal mast.
- March 25th, 2008, 10:12 pm
- Forum: Technical Forum
- Topic: What type of paint
- Replies: 8
- Views: 8776
Let me start with saying I have only painted single stage. I doubt there is a difference in performance of the paint. I usually paint single stage because I have to clean the gun only once. I also think it is easier to do touch ups with single stage. However I think it takes a little more skill to p...
- March 21st, 2008, 1:38 am
- Forum: Technical Forum
- Topic: Refurbishing SC20
- Replies: 37
- Views: 41182
My old inspection ports were cracked and the threads were stripped so I will replace them with new ones. One reason the ports cracked was because the holes weren't quite flat. This is probably due to the boat warping slightly over time. The fiber glass has cracked around the holes also. I started by...
- March 21st, 2008, 1:32 am
- Forum: Technical Forum
- Topic: Refurbishing SC20
- Replies: 37
- Views: 41182
- February 17th, 2008, 5:13 pm
- Forum: Technical Forum
- Topic: Paint for ARC 21
- Replies: 1
- Views: 3504