Rudder Rigging

Technical discussion of ARC products
Post Reply
Kevin Keller
Professional
Posts: 362
Joined: September 24th, 2006, 2:56 am
Boat Make/Model: SC-20, ARC22
Location: Honolulu

Rudder Rigging

Post by Kevin Keller »

I went sailing on George's boat a few weeks ago and noticed that his rudders were rigged differently than mine. I have 2 sets of rudders and they were both rigged the same.

Which one is correct?
You do not have the required permissions to view the files attached to this post.
Matt Haberman
Administrator
Posts: 602
Joined: November 10th, 2003, 8:22 pm
Location: Minnesota
Contact:

Post by Matt Haberman »

Kevin,

George's rudders are setup correctly. Your setup must make it awfuly hard to pull the rudders up? Another suggestion is to use the middle sheave for the black/blue down rope and the outer sheaves for the red up rope.
Matt Haberman
Aquarius Sail Inc.
http://www.aquarius-sail.com
Kevin Keller
Professional
Posts: 362
Joined: September 24th, 2006, 2:56 am
Boat Make/Model: SC-20, ARC22
Location: Honolulu

Post by Kevin Keller »

Yes, it was a little difficult. Weird how two boats were rigged wrong.

Thanks.
Post Reply