Hey folks, I need a wind vane and was thinking fo the Telo-Cat unit to go on the bridle. Will this unit work for my roller-furling setup on my SC17?
thanks,
Ultra
Wind bridle vane recommendation
-
ultrarunner
- Professional
- Posts: 62
- Joined: January 23rd, 2006, 3:34 am
- Location: Webster, NY
-
Matt Haberman
- Administrator
- Posts: 602
- Joined: November 10th, 2003, 8:22 pm
- Location: Minnesota
- Contact:
Re: Wind bridle vane recommendation
In the past people have modified the Telo-Cat mounting arm so it attached to the shackle below the roller furling drum. Unfortunately I don't have a picture of this setup.
That being said, one of the best wind indicators is cassette tape or tell-tale material taped to the bridle wires. It is much more responsive to light wind changes then the telo-cat.
That being said, one of the best wind indicators is cassette tape or tell-tale material taped to the bridle wires. It is much more responsive to light wind changes then the telo-cat.
-
Eric2101
- Professional
- Posts: 205
- Joined: August 16th, 2004, 5:42 am
- Boat Make/Model: Supercat 15
- Location: Davie, FL.
Re: Wind bridle vane recommendation
I prefer to use John Denver tapes, they are pretty fast. Karen Carpenter is good too.
Eric Arbogast
Supercat 15
Supercat 15
-
DanBerger
- Professional
- Posts: 280
- Joined: May 3rd, 2004, 3:29 pm
- Boat Make/Model: SC 15 w/ spin!, SC 19
- Location: Norfolk, VA
Re: Wind bridle vane recommendation
I have Elvis and Pure Prairie league. Nothing like a little afternoon delight!