Mast tang for SC15

[gahamby]

What's the best upgrade for my mast tang? It's kinda crowded up there. I've been told an H-18 tang is a good one. It looks good. I am open to suggestion. GH

[Mac M]

I switched the old single hole hound on mine out for the newer 2 holed one and was happy with it. Would a H18 hound fit a SC mast? When possible I go through Tom to get the parts made for our boats, just my opinion....

[gahamby]

With a two hole mast tang, what's the set up? Shrouds and for stay upper and trap wires lower?

[Mac M]

Opposite. The traps go in the top hole, shrouds and forestay in the bottom

[Kevin Keller]

You can use synthetic lines for the trap lines and it might make some more room.

[SC15Av8or]

You can use synthetic lines for the trap lines and it might make some more room.

What do you mean with this??

[Kevin Keller]

I used some Amsteel for my trap lines and was able to reduce the number of shackles on the tang. It made it a little less complicated and also lighter. If I come across a picture I will post it.

Kevin

[fjviola]

Dyneema Trap Lines I made for my ARC 21

viewtopic.php?f=3&t=644

franklin Viola
ARC 21