Hi,
can anyone tell me what is the recommended mast rake on a SC 20 (standard rig) and how do i measure it. What tools are required.
Thanks.
Mast Rake on SC 20.
-
- Novice
- Posts: 14
- Joined: August 11th, 2017, 10:31 pm
- Boat Make/Model: SC 20
- Location: Trinidad & Tobago
-
- Administrator
- Posts: 608
- Joined: November 10th, 2003, 8:22 pm
- Location: Minnesota
- Contact:
Re: Mast Rake on SC 20.
Historically on the SC-20 we ran the mast between vertical and 5 degrees back when sitting on the beach. The dolphin striker post is sitting at 5 degrees so you can use a angle protractor / finder to compare the difference between the post and the front of the mast.
You do not have the required permissions to view the files attached to this post.
-
- Novice
- Posts: 14
- Joined: August 11th, 2017, 10:31 pm
- Boat Make/Model: SC 20
- Location: Trinidad & Tobago
Re: Mast Rake on SC 20.
Hi Matt,
Thanks for the info. Will see if i get one and check it.
Thanks again.
Thanks for the info. Will see if i get one and check it.
Thanks again.
-
- Novice
- Posts: 14
- Joined: August 11th, 2017, 10:31 pm
- Boat Make/Model: SC 20
- Location: Trinidad & Tobago
Re: Mast Rake on SC 20.
Ok, i bought the angle protractor/finder today so i will find out how best i can get it done by this weekend.