I need a measurement

Technical discussion of ARC products
Post Reply
tnell
Hot Shot
Posts: 30
Joined: November 30th, 2010, 3:02 pm
Boat Make/Model: SC15 sold in 93 still miss it,

I need a measurement

Post by tnell »

If anyone has immediate acces to their mast....
I need to know the depth of the mast track from the aft edge to the inside

Also, how wide is the slot at the very bottom corner?

In other words, the full depth and width of the slot at the bottom corner. I want to put in a small sheave for a halyard turning block. For some reason my turning block is on a rope pigtail about two inches long and the halyard is hanging up terribly.
I think it will be easier to add a sheave than try to get the original back under the eye strap.
Post Reply