Daggerboard Screw
-
- Professional
- Posts: 362
- Joined: September 24th, 2006, 2:56 am
- Boat Make/Model: SC-20, ARC22
- Location: Honolulu
Daggerboard Screw
What is the purpose of the screw on the bottom of the daggerboards?
-
- Professional
- Posts: 249
- Joined: July 24th, 2012, 7:02 am
- Boat Make/Model: SuperCat 15#315
- Location: Falls Church VA 22042
Re: Daggerboard Screw
I don't know but Daggerboard Screw sounds like a Frank Zappa tune.
-
- Professional
- Posts: 362
- Joined: September 24th, 2006, 2:56 am
- Boat Make/Model: SC-20, ARC22
- Location: Honolulu
Re: Daggerboard Screw
Kinky!
-
- Administrator
- Posts: 597
- Joined: November 10th, 2003, 8:22 pm
- Location: Minnesota
- Contact:
Re: Daggerboard Screw
Drain plug
Seriously thou, the screw was used to hang the board during painting. When the paint is cured the hole is filled with 5200 and the screw is inserted.

Seriously thou, the screw was used to hang the board during painting. When the paint is cured the hole is filled with 5200 and the screw is inserted.
-
- Professional
- Posts: 362
- Joined: September 24th, 2006, 2:56 am
- Boat Make/Model: SC-20, ARC22
- Location: Honolulu
Re: Daggerboard Screw
Thanks Matt. Would have though you’d use one of the rope holes.
I was doing some repairs and painting myself.
I was doing some repairs and painting myself.
-
- Administrator
- Posts: 597
- Joined: November 10th, 2003, 8:22 pm
- Location: Minnesota
- Contact:
Re: Daggerboard Screw
Use those too. Hang the board horizontal, trailing edge down.