What is the spec paint for ARC products?
I ran across this product this morning, looks interesting.
http://www.topsecretcoatings.com/Marine-Coatings.asp
Paint
-
- Expert
- Posts: 48
- Joined: November 15th, 2003, 9:55 am
- Location: Minnesota
- Contact:
Eric,
All ARC & RC boats that we have built have been finished with Sherwin Williams Sunfire. Three part acrylic urethane.
I looked at the site you indicated and I guess I would do some extensive testing before I would venture a paint job with that product.
If you think about it the lowest cost segment of a paint job is the paint. A good paint job consists of a considerable amount of labor which is much more costly than the paint. Saving a couple of hundred dollars on paint can lead to long term problems.
Another factor is ease of repair if the finsh becomes scratched or damaged. Proper technique with Sunfire will yield an undectable match. Not so with a lot of other paints.
All ARC & RC boats that we have built have been finished with Sherwin Williams Sunfire. Three part acrylic urethane.
I looked at the site you indicated and I guess I would do some extensive testing before I would venture a paint job with that product.
If you think about it the lowest cost segment of a paint job is the paint. A good paint job consists of a considerable amount of labor which is much more costly than the paint. Saving a couple of hundred dollars on paint can lead to long term problems.
Another factor is ease of repair if the finsh becomes scratched or damaged. Proper technique with Sunfire will yield an undectable match. Not so with a lot of other paints.
Sincerely,
Tom Haberman
Tom Haberman
-
- Expert
- Posts: 48
- Joined: November 15th, 2003, 9:55 am
- Location: Minnesota
- Contact: