Page 1 of 1

Super Cat 19 Parts compatibility

Posted: June 25th, 2022, 9:54 pm
by MirrorCat
I’m new to the super cat 19’ this year. Been on a hobie 16’ for quite a few years . I don’t need any parts yet. That being said, I have a feeling this isn’t a common boat to come across from my google research. Are their other cats that are compatible with the super cat 19’? i.e. dagger boards, mast, rudders

Re: Super Cat 19 Parts compatibility

Posted: June 26th, 2022, 8:01 am
by Matt Haberman
Congratulations on your purchase of the SuperCat 19.

The parts you mentioned are unique to the SuperCat product line, however many of them are common with other model sizes. Rudders are common with the entire product line, daggerboards were common between the 20 and 19. The mast profile was common across the product line, however the length and rigging varied with each boat size.
Do you know which version of the 19 you have? There were three versions:
  • Standard = 8' beam and 28'9" mast
  • XL = 8' 6" beam and 33' mast
  • X = 8' 6" beam, 33' mast & NO daggerboards

Re: Super Cat 19 Parts compatibility

Posted: June 26th, 2022, 10:18 am
by MirrorCat
Thank you Matt. It’s good to be here.


It would be the standard cat.

Re: Super Cat 19 Parts compatibility

Posted: June 26th, 2022, 3:56 pm
by Matt Haberman
The Standard 19 and the Supercat 17 both share the same mast length. The main difference between the two is that the SC19 mast had spreaders, the SC17 did not.