Sc20 Telescoping trailer

General Sailing Discussion
Post Reply
WindyB
Novice
Posts: 6
Joined: June 7th, 2005, 10:49 am

Sc20 Telescoping trailer

Post by WindyB »

Anyone had experience with Bill Robert's designed telescoping trailer re. Using it to raise mast as intended ?

George
You do not have the required permissions to view the files attached to this post.
Interested in ARC 22 comments
Matt Haberman
Administrator
Posts: 608
Joined: November 10th, 2003, 8:22 pm
Location: Minnesota
Contact:

Re: Sc20 Telescoping trailer

Post by Matt Haberman »

I'm familiar with the Trailex version which I believe is probably based on the the one you have.

What specific questions do you have?
Matt Haberman
Aquarius Sail Inc.
http://www.aquarius-sail.com
gahamby
Professional
Posts: 254
Joined: July 24th, 2012, 7:02 am
Boat Make/Model: SuperCat 15#315
Location: Falls Church VA 22042

Re: Sc20 Telescoping trailer

Post by gahamby »

I made a similar rig for my SC15. What questions do you have?
I can only view the first picture.
WindyB
Novice
Posts: 6
Joined: June 7th, 2005, 10:49 am

Re: Sc20 Telescoping trailer

Post by WindyB »

. Want to know the correct way of raising mast using the trailer as intended by Bill Roberts.
There is a hole just below mast yoke where a fitting may have been where main sheet could attach to facilitate raising mast. But not sure.
When I sell the trailer with the 20 I want to be able to explain to new owner.

I have an ARC gin pole but usually raise by hand. In original manual Bill R describes raising mast with this very trailer but a bit vague.

I've had 3 ... 20s since 81 and just picked up an 80 hull #3 🤓
Interested in ARC 22 comments
gahamby
Professional
Posts: 254
Joined: July 24th, 2012, 7:02 am
Boat Make/Model: SuperCat 15#315
Location: Falls Church VA 22042

Re: Sc20 Telescoping trailer

Post by gahamby »

Can you post the manual? That looks like a rope winch on the mast support. Could the fitting below the mast yoke be for a snatch block to turn the rope from the winch towards the head stay or masthead?
I hoisted a mast length bridal to my masthead with the main halyard and attached it to my recovery winch strap to haul my mast up.
Post Reply