Mast specifications

Technical discussion of ARC products
Post Reply
ultrarunner
Professional
Posts: 62
Joined: January 23rd, 2006, 3:34 am
Location: Webster, NY

Mast specifications

Post by ultrarunner »

Need exact dimensions and weight of the mast on a SC17. Lining up some shipping.

thanks
ultrarunner
Professional
Posts: 62
Joined: January 23rd, 2006, 3:34 am
Location: Webster, NY

Re: Mast specifications

Post by ultrarunner »

ultrarunner wrote:Need exact dimensions and weight of the mast on a SC17. Lining up some shipping.

thanks
Not a trick question folks.

Nothing??? Is this not in a manual somewhere? Can someone at the factory at least ball park this.

I sorta need to be shipped, but the shipping company wont accept a ball-park size and dimension.

thanks.....
rghdc
Hot Shot
Posts: 35
Joined: January 25th, 2004, 11:22 pm
Location: Florida

SC Rough weight and length...

Post by rghdc »

Ultrarunner

I too have a SC 17…in my owner’s manual it says the Mast weighs approximately 55 lbs when fully rigged. It is 28’-9” long…I am assuming that it with the end castings and not just the extrusions. Hopefully Matt will follow up with exact information…this at least gets you in the ball park.

Regards,
Bob
ultrarunner
Professional
Posts: 62
Joined: January 23rd, 2006, 3:34 am
Location: Webster, NY

Post by ultrarunner »

Outstanding, thanks for the gouge.
Matt Haberman
Administrator
Posts: 602
Joined: November 10th, 2003, 8:22 pm
Location: Minnesota
Contact:

Post by Matt Haberman »

Sorry about that... I missed your original post :(

The mast extrusion is 28' 9" long plus the casting. I don't have the dimensions in front of me right now, but if you give yourself another 6" you should be fine. So I guess that would give you overall length of 29' 3".
I would suggest wrapping the mast in several layers of bubble pack and then 2 layers of industrial stretch wrap over that.
Matt Haberman
Aquarius Sail Inc.
http://www.aquarius-sail.com
ultrarunner
Professional
Posts: 62
Joined: January 23rd, 2006, 3:34 am
Location: Webster, NY

Post by ultrarunner »

Matt, that should do it.

thanks so much.
Post Reply