Hooking up shroud extenders on SC20
Posted: December 30th, 2017, 7:08 am
Hi everyone,
I recently purchased a SC20 with some minor repair works on the both forward bulkheads........ this has now been changed out and
i am now going to strip the boat of the mast and cross members to repaint the hulls. As this time the mast is still up and I am looking
at the shroud extenders and would like to know how they are actually supposed to be connected. at this moment the lever is up but the
shrouds are still heavily tensioned. Can anyone enlighten me with all the parts that should be there and isn't the rigging supposed to be
loose enough so as to right the boat but not loose enough for demasting. I will try to get some pics up soon.
Thanks
I recently purchased a SC20 with some minor repair works on the both forward bulkheads........ this has now been changed out and
i am now going to strip the boat of the mast and cross members to repaint the hulls. As this time the mast is still up and I am looking
at the shroud extenders and would like to know how they are actually supposed to be connected. at this moment the lever is up but the
shrouds are still heavily tensioned. Can anyone enlighten me with all the parts that should be there and isn't the rigging supposed to be
loose enough so as to right the boat but not loose enough for demasting. I will try to get some pics up soon.
Thanks